产品分类图

HOME < PRODUCTS

Wlink Cellular Router works on 4G / 3G mobile network, high performance and harden casing design ideal for various of IIoT and M2M application.

frintfoot embedded 4G Router

PoE (Power over Ethernet) is optional on R520 4G router and G530 5G router

outdoor 5G/4G router

The rubust D80 series Serial to IP modem (also named DTU) equips with PPP, TCP/IP and DDP protocol, it could converts the serial data (RS232/485/422) into IP data and then transfer to data center through GPRS / 3G / 4G network.

Wink industrial cellular Modem with RS232/RS-485/USB 2.0 interface is the modem that provides SMS and dial-up function by 3G / 4G Cellular network cater for industrial application requirement.

a cellular communication device installed at a remote location that collect data, codes the data into a format that is transmittable and transmit the data back to a central station or master, being developed especially for data collection and data transmi

WLINK M2M Management Platform is centralized management and administration system catering for WLINK series cellular router. The system enables the operator easy to monitor, configure, upgrade firmware and manage bulk Wlink router remotely under the web o

WLINK Bus Wi-Fi solution provides passengers a meaningful on board Wi-Fi hotspot service by installing 4G/3G Router.

Accessories for serial Wlink device

products

D82 Dual Serial IP Modem


Wlink D82 is Dual-Serial port Industrial Serial to IP cellular modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through 4G mobi...

  • Data transfer from serial data to IP data

  • FDD-LTE / TDD-LTE 4G Network

  • Two RS-232/485/422 port

  • TCP/UDP Protocal 

  • Auto Dial-up 

  • Application:  SCADA, PLC, RTU oil field, coal mine, weather forecast, environment protection and AMR etc 


products

D83 Series NB-IoT/Cat-M1


Wlink D83 is Industrial Serial to IP NB-IoT/Cat-M1 modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through NB-IoT/CAT-M1 netw...

  • NB-IoT/CAT-M1(eMTC) network optional

  • Low Power Consumption

  • Wide Coverage Area

  • Numerous and Powerful Nodes Connections

  • Friendly configuration tool

  • Support WLINK Modem Management Platform


products

D80 Serial to IP 4G Modem


Wlink D80-4 is Industrial Serial to IP cellular 4G modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through 4G mobile network.

  • Data transfer from serial data to IP data

  • GPRS/EDGE/3G/4G  Network

  • Single or two RS-232/485/422 version optional

  • TCP/UDP Protocal 

  • Auto Dial-up 

  • Application:  SCADA, PLC, RTU oil field, coal mine, weather forecast, environment protection and AMR etc 


products

D80 Serial to IP 3G Modem


Wlink D80-3 is Industrial Serial to IP cellular 3G modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through 3G mobile network.

  • Data transfer from serial data to IP data

  • HSPA+/HSPA/HSDPA 3G Network

  • Single or two RS-232/485/422 version optional

  • TCP/UDP Protocal 

  • Auto Dial-up 

  • Application:  SCADA, PLC, RTU oil field, coal mine, weather forecast, environment protection and AMR etc 


products

D80 Serial to IP GPRS Modem


Wlink D80-1 is Industrial Serial to IP cellular GPRS modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through GPRS 2.5G mobile ...

TOP