Wlink Cellular Router works on 5G/4G/3G mobile network, high performance and harden casing design ideal for various of IIoT and M2M application.
frintfoot embedded 4G Router
PoE (Power over Ethernet) is optional on R520 4G router and G530 5G router
outdoor 5G/4G router
The rubust D80 series Serial to IP modem (also named DTU) equips with PPP, TCP/IP and DDP protocol, it could converts the serial data (RS232/485/422) into IP data and then transfer to data center through GPRS / 3G / 4G network.
Wink industrial cellular Modem with RS232/RS-485/USB 2.0 interface is the modem that provides SMS and dial-up function by 3G / 4G Cellular network cater for industrial application requirement.
a cellular communication device installed at a remote location that collect data, codes the data into a format that is transmittable and transmit the data back to a central station or master, being developed especially for data collection and data transmi
WLINK M2M Management Platform is centralized management and administration system catering for WLINK series cellular router. The system enables the operator easy to monitor, configure, upgrade firmware and manage bulk Wlink router remotely under the web o
WLINK Bus Wi-Fi solution provides passengers a meaningful on board Wi-Fi hotspot service by installing 4G/3G Router.
Accessories for serial Wlink device
D82 Serial to IP Modem with Dual Port
Wlink D82 is an industrial-grade, dual-serial port cellular modem (also known as a DTU) designed to convert serial data (RS232/485/422) into IP data and transmit it to a data center via 4G mobile netw...
Serial-to-IP data conversion
4G LTE connectivity for reliable data transfer
Dual serial ports RS-232/485/422 for versatile industrial connectivity
TCP/UDP protocols for efficient and secure data transmission
Auto dial-up ensures continuous connectivity
Wide range of applications - SCADA, PLCs, RTUs, oil fields, coal mines, weather forecasting, AMR, etc.
Wlink D83 is an industrial-grade serial-to-IP modem (also known as a DTU) designed to convert serial data (RS232/485/422) into IP data and transmit it to a data center via NB-IoT/ LTE CAT 1 networks. ...
Optional NB-IoT/ LTE Cat 1 (eMTC) network support
Low power consumption for extended operational life
Wide coverage area for reliable connectivity in remote locations
1xRS232/RS-485 (serial to IP)
User-friendly configuration tool for quick setup and management
Compatible with WLINK M2M Management Platform for centralized control
Wlink D80 is an industrial-grade serial-to-IP cellular modem (also known as a DTU). It converts serial data (RS232/485/422) into IP data and transmits it to your data center via 4G, 3G, or 2G mobile n...
Converts serial data (RS232/485/422) into IP data
Supports GPRS, EDGE, 3G, and 4G networks for reliable connectivity
Single or dual RS-232/485/422 port versions available
Supports TCP/UDP protocols for efficient data transmission
Auto dial-up for persistent network connectivity
Applications ideal for: SCADA systems and PLCs,Weather forecasting, environmental monitoring, AMR, etc.
Wlink D80-3 is Industrial Serial to IP cellular 3G modem (called as DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through 3G mobile network.
Data transfer from serial data to IP data
HSPA+/HSPA/HSDPA 3G Network
Single or two RS-232/485/422 version optional
TCP/UDP Protocal
Auto Dial-up
Application: SCADA, PLC, RTU oil field, coal mine, weather forecast, environment protection and AMR etc
Wlink D80-1 is Industrial Serial to IP cellular GPRS modem (called as 2G DTU as well) which convert the serial data (RS232/485/422) into IP data and then transfer to data center through GPRS 2.5G mobi...
Data transfer from serial data to IP data
2G GSM GPRS Low speed mobile Network for small data application
Single or two RS-232/485/422 version optional
TCP/UDP Protocal
Auto Dial-up
Application: SCADA, PLC, RTU oil field, coal mine, weather forecast, environment protection and AMR etc